Troubleshooting

Symptom: Lamps will not light.

Possible Cause

Solution

No power to the ballast

- Check the power source

Blown Fuse

- Replace fuse

Improperly seated connector

- Reseat wire harness into connector on ballast

Symptom: Unit Shuts Down Immediately

Possible Cause

Solution

Lamps not properly seated in endcaps

- Reseat lamps into endcaps

Defective Lamps

- Replace questionable lamps

Harness wired incorrectly for lamp configuration

- Double check that all connections match the wiring diagram for your lamp configuration

Improper endcaps in use

- Replace endcaps with correct end caps for your application

Symptom: Not all of the lamps light

Possible Cause

Solution

Lamps wired incorrectly

- Rewire lamps according to wiring diagram

Defective Lamps

- Replace questionable lamps